Parts & Accessories
DESCRIPTION
ADDITIONAL INFORMATION
Kendon 4-Pin Trailer Wiring Harness - 15 Ft
The Kendon 4-Pin Trailer Wiring Harness is designed to replace faulty/damaged wiring harness and allows you to connect to your tow vehicle to control trailer light functions.
Color Coded Wires for Easy Installation
- White - Ground
- Brown - Tail, License Illuminator, Side Markers
- Yellow - L/H Driver Side Stop & Turn
- Green - R/H Passenger Side Stop & Turn
Manufacturer Cross Reference
Harness will work as an exact replacement for:
- All Kendon Trailers - (Some models will require trimming)
DESCRIPTION
ADDITIONAL INFORMATION
Kendon Single, Single Ride-Up, Combo and Utility Trailer Center Rigid Caster Replacement (2003-Up)
Replacement center rigid caster for Kendon Single, Single Ride-Up, Combo and Utility Motorcycle Trailers. The rigid caster fits 2003 and newer Kendon Single Rail, Three-Rail Combo and Utility trailers. Replacement caster fits in the center mounting caster bracket on Kendon trailers.
NOTE: Caster fits 2003 to 2015 Single and Single Ride Up trailers. 2016 and newer require the SC00 center swivel caster.
Each 2003 and newer Kendon Single Rail, Three-Rail Combo and Utility trailer is equipped with one center rigid caster. This is a direct replacement bolt-on caster.
Specs:
- 3″ Hard Rubber Wheel
- Steel Frame
Ship Weight
Dimensions
SPECS
Model : Kendon Center Rigid Caster
Part Number : UTRC
Standard Color : Black
Weight : 2 lbs
Application : 2003 and Newer Kendon Single, Single Ride-Up, Three-Rail Combo and Utility Trailers
All measurements in inches (in/”) and weights in pounds (lbs).
1.Manufacturer’s Suggested Retail Price (MSRP) excludes destination freight charges, tax, title, license, handling, dealer fees and optional equipment.
Photos shown are representational photos only. Kendon reserves the right to technical changes and model changes. Models shown equipped with standard equipment only. Optional equipment not included. Accessories are optional.
DESCRIPTION
ADDITIONAL INFORMATION
Kendon Trailer 4″ Rubber Latch Replacement (3-Rail Combo and Utility trailers, 2003-Up)
Replacement 4″ rubber latch for 3-rail Combo/Dirt Bike and Utility Trailers. The rubber latch fits 2003-current Kendon three-rail and utility trailers. This is a direct replacement bolt-on latch.
Specs:
- 4″ Rubber Latch
- Fits 2003-current models
Ship Weight
Dimensions
DESCRIPTION
ADDITIONAL INFORMATION
Kendon Single Ride Up Trailer 6″ Rubber Latch Replacement (2003-Up)
Replacement 6″ rubber latch for Single Ride-Up Trailers. The rubber latch fits 2003 and newer Kendon Single Ride-Up trailers. This is a direct replacement bolt-on latch.
DESCRIPTION
ADDITIONAL INFORMATION
Motorcycle Lift Oil Drain Pan
Kendon Bike Lift Oil Drain Pan. Oil Drain Pan comes with drain hose and fits all lift models.
Ship Weight
Dimensions
DESCRIPTION
ADDITIONAL INFORMATION
Custom Fit Motorcycle Trailer Cover for Kendon Trike Trailer
Don't let your trailer stand outside Naked! Kendon Motorcycle Trailer Covers will help keep your motorcycle trailer looking like new.
Fits: BB307RU (All Years)
Why Purchase This Custom Fit Trike Trailer Cover?
Indoor Storage: If you store your trailer indoors, you really don't need this product, however it will keep the dust off of your trailer and make people wonder what's under the cover. Plus it looks good in your garage.
Outside Storage: Protect your Kendon Trike Trailer from the elements. Kendon uses state of the art powder coating for lasting beauty, but exposed to the elements any finish can be affected.
FACT: Your trailer is all metal (except for the tires). Sun, Wind, Rain, Snow, extreme temperatures are brutal over time and eventually will dull or oxidize almost any finish. It even affects the tires.
An industrial rated trailer cover is the best effective protective barrier to the nasty elements to preserve the finish of your Kendon Trailer.
Custom Fit Trailer Cover Features & Benefits
- Custom Fit, specific to trailer model, does not trap water and debris.
- Protects your Trike / Can Am Spyder Trailer from the elements.
- Made from 600D Oxford fabric with PVC coating on the inside and zipper bag for convenient storage when not in use.
- Double Stitched, interlocked seams offer superior strength and water resistance.
SPECS
FAQ’s (Frequently Asked Questions)
Q: What’s different about this cover and the previous one you used to sell?
A: The new covers are designed for outdoor use and are custom fit to each trailer. The double stitched, interlocked seams offer superior strength and water resistance. The new trailer covers are made from 100% Polyester; old covers were made from Nylon. While both materials are durable and lightweight, polyester is faster drying and more abrasion resistant. Both Polyester and Nylon are hydrophobic (meaning they don’t absorb water), but polyester resists pilling better than nylon and has better water-wicking ability, which means it is much faster drying than nylon. Finally, when it comes to color retention, because of its water-wicking ability, dyed polyester expels the water in the dye but not the dye itself, which bonds to the fibers. The result: longer lasting color with little fading.
Q: Are you saying that my Kendon trailer will rust?
A: Yes. Kendon uses the best industrial finishes available for long term durability. Depending on how harsh the climate and the length of time, any finish will eventually be affected by the elements.
Q: What’s the big deal about the custom fit? Why not just buy a cheap tarp?
A: Water, Wind and Dirt. A custom fit cover stays on. A custom fit cover does not form pockets to trap water and debris. Think of the custom fit like a full fairing on a bike. The rain, snow and dirt roll off of it and don’t lay on it. If it blows away it is likely that the trailer will go with it.
Photos shown are representational photos only. Kendon reserves the right to technical changes and model changes. Models shown equipped with standard equipment only. Optional equipment not included. Accessories are optional.
NOTE: The custom fit trailer cover may not fit onto the trailer with certain accessories installed on the trailer. Kendon recommends removing any accessories prior to storing your trailer and using the cover.
IMPORTANT: Please ensure that you are ordering the correct part for your model trailer. If you have ANY doubts, please Contact Us for assistance with the purchase.
DESCRIPTION
ADDITIONAL INFORMATION
Crank Down Swivel Jack Stand Product Description (GO! Series) For Premium Series click here.
Why Purchase this Product?
The Trailer Crank Down Swivel Jack Stand with Roller Wheel provides a solution for the owner who wants to detach a fully loaded Kendon Trailer from the tow vehicle. The roller wheel permits the user to move the Trailer while fully loaded.
Easy to use: High mechanical leverage makes this Retractable Jack Stand easy to use. Very little cranking effort is needed to elevate the trailer off of the ball hitch of the tow vehicle.
This Trailer Jack Stand fits GO! Series trailers Only.
Trailer Swivel Jack Stand Features & Benefits
Key Motorcycle Trailer Retractable Swivel Jack Stand features and benefits.
- Heavy Duty construction.
- Crank down feature will pick up 500lbs of tongue weight. Max load of jack is always higher than Kendon's Max load capacity.
- Plated to resist oxidation.
- Quick on / Quick off with no tools required. Slide in the jack, install the pin and you're ready to use the jack.
- Bolt on application (No welding required).
- Allows you to move the Kendon trailer when not attached to a vehicle (loaded or unloaded).
- Please note: This item is no longer produced in the USA.
Ship Weight
Dimensions
SPECS
DESCRIPTION
ADDITIONAL INFORMATION
Motorcycle Lift 18" Tool Tray - Service Tray
Kendon Bike Lift 18" Tool Tray - Service Tray. 18" Service Tray fits all Kendon Stand-Up™ Lifts.
Ship Weight
Dimensions
DESCRIPTION
ADDITIONAL INFORMATION
Kendon Trailer Soft Loop Tie Down Strap
The Kendon Trailer Soft Ties are easy to use by creating a slipknot or loop with any tie down. Simply cinch the soft loop and hook the tie-down to it to protect your trailer or motorcycle frame.
- Heavy Duty Loops - With an impressive 1,500 lb. capacity with a 4,500 lb. break strength!
- Dimensions: 1" Wide x 12" Long
Ship Weight
Dimensions
DESCRIPTION
ADDITIONAL INFORMATION
Motorcycle Lift 36" Tool Tray - Service Tray for Bike Lifts
Kendon Bike Lift 36" Tool Tray - Service Tray. 36" Service Tray fits the Cruiser and Chopper Stand-Up™ Lifts.
IMPORTANT: Please ensure that you are ordering the correct part for your model lift. If you have ANY doubts, please Contact Us for assistance with the purchase.
Shipping Notes
Continental US shipping only
Ship Weight
Dimensions
DESCRIPTION
ADDITIONAL INFORMATION
Custom Fit Motorcycle Trailer Cover for Kendon Utility Trailer
Don't let your trailer stand outside Naked! Kendon Motorcycle Trailer Covers will help keep your motorcycle trailer looking like new.
Fits: UT305SXS
Why Purchase This Custom Fit Utility Trailer Cover?
Indoor Storage: If you store your trailer indoors, you really don't need this product, however it will keep the dust off of your trailer and make people wonder what's under the cover. Plus it looks good in your garage.
Outside Storage: Protect your Kendon Utility Trailer from the elements. Kendon uses state of the art powder coating for lasting beauty, but exposed to the elements any finish can be affected.
FACT: Your trailer is all metal (except for the tires). Sun, Wind, Rain, Snow, extreme temperatures are brutal over time and eventually will dull or oxidize almost any finish. It even affects the tires.
An industrial rated trailer cover is the best effective protective barrier to the nasty elements to preserve the finish of your Kendon Trailer.
Custom Fit Trailer Cover Features & Benefits
- Custom Fit, specific to trailer model, does not trap water and debris.
- Protects your Utility Trailer from the elements.
- Made from 600D Oxford fabric with PVC coating on the inside and zipper bag for convenient storage when not in use.
- Double Stitched, interlocked seams offer superior strength and water resistance.
SPECS
FAQ’s (Frequently Asked Questions)
Q: What’s different about this cover and the previous one you used to sell?
A: The new covers are designed for outdoor use and are custom fit to each trailer. The double stitched, interlocked seams offer superior strength and water resistance. The new trailer covers are made from 100% Polyester; old covers were made from Nylon. While both materials are durable and lightweight, polyester is faster drying and more abrasion resistant. Both Polyester and Nylon are hydrophobic (meaning they don’t absorb water), but polyester resists pilling better than nylon and has better water-wicking ability, which means it is much faster drying than nylon. Finally, when it comes to color retention, because of its water-wicking ability, dyed polyester expels the water in the dye but not the dye itself, which bonds to the fibers. The result: longer lasting color with little fading.
Q: Are you saying that my Kendon trailer will rust?
A: Yes. Kendon uses the best industrial finishes available for long term durability. Depending on how harsh the climate and the length of time, any finish will eventually be affected by the elements.
Q: What’s the big deal about the custom fit? Why not just buy a cheap tarp?
A: Water, Wind and Dirt. A custom fit cover stays on. A custom fit cover does not form pockets to trap water and debris. Think of the custom fit like a full fairing on a bike. The rain, snow and dirt roll off of it and don’t lay on it. If it blows away it is likely that the trailer will go with it.
Photos shown are representational photos only. Kendon reserves the right to technical changes and model changes. Models shown equipped with standard equipment only. Optional equipment not included. Accessories are optional.
NOTE: The custom fit trailer cover may not fit onto the trailer with certain accessories installed on the trailer. Kendon recommends removing any accessories prior to storing your trailer and using the cover.
IMPORTANT: Please ensure that you are ordering the correct part for your model trailer. If you have ANY doubts, please Contact Us for assistance with the purchase.
DESCRIPTION
ADDITIONAL INFORMATION
Kendon 2" Trailer Hitch Ball
Part #: 2B
Size: 2"
Kendon 2" balls are compatible with all Kendon standard-duty and heavy duty trailers and other trailers. (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc).
Specs:
- 2" Ball Diameter
- Chrome Finish
- Steel
- Shank Diameter: 1"
- Shank Length: 2 1/8"
- Weight Rating: 6000 lbs.
DESCRIPTION
ADDITIONAL INFORMATION
Kendon Factory Extended Warranty - 5-Year Option
Your 5-Year Kendon Factory Extended Warranty will extend the factory warranty four (4) additional years from the date exactly one year after the original purchase of the trailer. The original one-year Kendon Factory Warranty will remain in effect, providing a total of five (5) years of Kendon Factory Warranty. All Factory Extended Warranties must be purchased within 180 days of original purchase date of the trailer.
What is covered?
- Frame (failure, cracks or breaks in the metal, weld failure)
- Coupler
- Wheel chock(s) and rails
- Decking (aluminum diamond plate and expanded steel)
- Fenders
- Factory lights
- Original equipment ramp
- Rear section hinges
- Casters (bearing failure only)
- Wiring harness
- Stickers, rubber components, plastic caps, hardware, etc.
Note: The axle, hubs, bearings, and seals are protected by a limited five-year manufacturer’s warranty by the axle manufacturer, Tie Down Engineering. Tires are not covered by any warranty.
What is not covered?
- Damage sustained prior to Factory Extended Warranty purchase
- Paint damage from normal use
- Rims that rust, chip, or peel or are damaged or bent by road hazards, misuse, or improper care
- Dents, dings, scratches or chips
- Damage caused by misuse, abuse, neglect, or proper maintenance
- Damage caused by any accident, collision, or road hazard
- Damage caused by any criminal act or a deliberate act to cause damage
- Damage caused by dirt, stones or rocks
- Damage caused by acts of God, nature, riot or war
- Damage caused by improper loading and unloading
- Personal injury caused by any action above or any other action, deliberate, accidental, or by failure of any part covered or uncovered by this extended warranty
- Any damage to any personal property, including but not limited to vehicle(s) loaded or unloaded
- Any damage to the towing vehicle
- Any damage to anything except the covered trailer
- Loss or damage due to theft or misplacement of trailer items
- Damage caused by improper securing of the vehicle or cargo being towed
- Damage caused by failure of anything that is securing the tow load to the covered trailer (tie downs, wheel locks, etc.)
- Damage caused by any and all after market products
- All products not sold by Kendon or authorized by Kendon
- All aftermarket products
- Weld failure caused by accidents or improper maintenance
- Tires or tire wear/failure of any kind
- The wiring harness if damaged where it plugs in to the towing vehicle
- Damage to the hinge points on the rear of the trailer and the trailer tail section caused by towing open and empty, improper care and maintenance, or improper loading or unloading
- All shipping costs for repair or replacement parts or trailer
- Towing or transportation to a repair facility
Repairs
Repairs may be performed by any Factory Authorized Kendon Dealer with a repair facility. All warranty repairs must be authorized prior to performing the repair. If there is no Factory Authorized Kendon Dealer with a repair facility within 100 miles of your location, you may choose a local shop willing to perform the repair. A written repair estimate is required prior to performing the repair.
SPECS
Kendon Factory Extended Limited Warranty or Service Contract
I. SERVICE CONTRACT OR LIMITED WARRANTY: IF YOU PURCHASED YOUR TRAILER, AS INCORPORATED WITHIN THE RECEIPT, IN ALABAMA, CALIFORNIA, HAWAII, KENTUCKY, ILLINOIS, NEVADA, NEW YORK, OKLAHOMA, OREGON, SOUTH CAROLINA, TEXAS, VERMONT, WASHINGTON, OR WYOMING, THIS DOCUMENT IS A SERVICE CONTRACT. OTHERWISE, IT IS AN EXTENDED LIMITED WARRANTY.
II. FEE: You were charged a one-time fee to receive this Extended Limited Warranty (hereinafter the “Warranty”) or Service Contract (hereinafter the “Contract”). There is no additional monthly or annual service fee. There is a $50 fee to transfer ownership of this Extended Limited Warranty or Service Contract (please see Section IIX,A).
III. WHAT THIS AGREEMENT COVERS:
A. COVERAGE IF IT IS AN EXTENDED LIMITED WARRANTY:
1. Kendon Industries, LLC (hereinafter “Kendon”) warrants your individually owned Kendon trailer (hereinafter the “Product”) against defects in material and workmanship under normal use and service. THIS WARRANTY COVERS THE TRAILER ONLY AND NOT ITS ACCESSORIES OR TIRES, INCLUDING THOSE INCLUDED WITH THE ORIGINAL PURCHASE. Please see Section IV for details of what is covered by the Warranty.
2. At its option, Kendon will replace or repair the Product during the warranty period at no charge in accordance with the terms of this Warranty. The replacement parts may be new or reconditioned as available. All Products replaced by Kendon shall become the property of Kendon. Repairs may be performed by any Factory Authorized Kendon Dealer with a repair facility. All warranty repairs must be authorized prior to performing the repair. If there is no Factory Authorized Kendon Dealer with a repair facility within 100 miles of your location, you may choose a local shop willing to perform the repair. A written repair estimate is required prior to performing the repair.
B. COVERAGE IF IT IS A SERVICE CONTRACT:
1. If there is a defect (including pre-existing) in the material and/or workmanship of your individually owned Kendon trailer (hereinafter the “Product”), and the Product has been subject only to normal use and service, Kendon agrees to repair or replace the Product at no charge in accordance with the terms of this Service Contract. The replacement parts may be new or reconditioned as available. All Products replaced by Kendon shall become the property of Kendon. Repairs may be performed by any Factory Authorized Kendon Dealer with a repair facility. All warranty repairs must be authorized prior to performing the repair. If there is no Factory Authorized Kendon Dealer with a repair facility within 100 miles of your location, you may choose a local shop willing to perform the repair. A written repair estimate is required prior to performing the repair. THIS SERVICE CONTRACT COVERS THE TRAILER ONLY AND NOT ITS ACCESSORIES OR TIRES, INCLUDING THOSE INCLUDED WITH THE ORIGINAL PURCHASE.
IV. COVERED ITEMS AND COMPONENTS
– Frame (failure, cracks or breaks in the metal, weld failure)
– Coupler
– Wheel chock(s) and rails
– Decking (aluminum diamond plate and expanded steel)
– Fenders
– Factory lights
– Original equipment ramp
– Rear section hinges
– Casters (bearing failure only)
– Wiring harness
– Stickers, rubber components, plastic caps, hardware, etc.
– Note: The axle, hubs, bearings, and seals are protected by a limited five-year manufacturer’s warranty by the axle manufacturer, Tie Down Engineering. Tires are not covered by any warranty.
V. WHAT THIS WARRANTY OR SERVICE CONTRACT DOES NOT COVER:
– Damage sustained prior to Factory Extended Warranty purchase
– Paint damage from normal use
– Rims that rust, chip, or peel or are damaged or bent by road hazards, misuse, or improper care
– Dents, dings, scratches or chips
– Damage caused by misuse, abuse, neglect, or proper maintenance
– Damage caused by any accident, collision, or road hazard
– Damage caused by any criminal act or a deliberate act to cause damage
– Damage caused by dirt, stones or rocks
– Damage caused by acts of God, nature, riot or war
– Damage caused by improper loading and unloading
– Personal injury caused by any action above or any other action, deliberate, accidental, or by failure of any part covered or uncovered by this extended warranty
– Any damage to any personal property, including but not limited to vehicle(s) loaded or unloaded
– Any damage to the towing vehicle
– Any damage to anything except the covered trailer
– Loss or damage due to theft or misplacement of trailer items
– Damage caused by improper securing of the vehicle or cargo being towed
– Damage caused by failure of anything that is securing the tow load to the covered trailer (tie downs, wheel locks, etc.)
– Damage caused by any and all after market products
– All products not sold by Kendon or authorized by Kendon
– All aftermarket products
– Weld failure caused by accidents or improper maintenance
– Tires or tire wear/failure of any kind
– The wiring harness if damaged where it plugs in to the towing vehicle
– Damage to the hinge points on the rear of the trailer and the trailer tail section caused by towing open and empty, improper care and maintenance, or improper loading or unloading
– All shipping costs for repair or replacement parts or trailer
– Towing or transportation to a repair facility
VI. HOW LONG THIS WARRANTY OR SERVICE CONTRACT LASTS: Kendon will provide the warranties or benefits, described in Paragraph III, for exactly four (4) additional years from the date exactly one year after the original purchase of the trailer. The original one-year Kendon Factory Warranty will remain in effect, providing a total of five (5) years of Kendon Factory Warranty.
VII. HOW TO GET YOUR PRODUCT REPAIRED OR REPLACED UNDER THIS AGREEMENT: To repair or replace your Product, please contact Kendon directly by calling 714-630-7144 or 1-800-847-8618.
VIII. YOUR OBLIGATIONS UNDER THIS WARRANTY OR SERVICE CONTRACT: You must use the Product in a normal way; you must protect against further damage to the Product if there is a covered defect; you must follow the Product’s instruction manual. FAILURE TO FOLLOW THE PRODUCT’S INSTRUCTION MANUAL, INCLUDING IMPROPER TIE-DOWN OF VEHICLES TO THE TRAILER, WILL RESULT IN DENIAL OF WARRANTY OR SERVICE.
IX. HOW AND WHEN WE MAY TERMINATE THIS WARRANTY OR SERVICE CONTRACT:
A. Kendon may terminate this Warranty or Contract if you: (1) fail to pay an amount when due; (2) commit fraud or make a material misrepresentation in obtaining this Service Contract, or in presenting a claim; or (3) perform any act or omission or violate any condition of this Service Contract, after the effective date of this Service Contract that substantially and materially increases the service required under this Service Contract. Cancellation of this Warranty or Service Contract by Kendon will be effective fifteen (15) days after you receive the notice of cancellation.
B. If within thirty (30) days of receiving this Warranty or Service Contract you wish to cancel service and you have not made a claim under this Warranty or Service Contract, simply notify Kendon and we will refund all fees paid up to the date of termination.
IIX. OTHER CONDITIONS:
A. This Warranty or Service Contract may be transferred to a new buyer/owner by paying a transfer fee of fifty (50) dollars. Please contact Kendon directly by calling 714-630-7144 or 1-800-847-8618 to complete the transfer.
B. This is Kendon’s complete Warranty or Service Contract for your Product. Kendon assumes no obligation or liability for additions or modifications to this Warranty or Service Contract unless made in writing and signed by an officer of Kendon. If this document is a Warranty, Kendon does not warrant the assembly, maintenance or service of the Product, accessories, or tires.
C. Kendon cannot be responsible in any way under this Warranty or Service Contract for any ancillary equipment attached to or used in connection with the Product, or for operation of the Product with any ancillary equipment. All such equipment is expressly excluded from this Warranty or Service Contract. Furthermore, Kendon cannot be responsible for any damage to the Product resulting from the use of ancillary equipment not furnished by Kendon for use with individually owned equipment.
D. When the Product is used in conjunction with ancillary or peripheral equipment not furnished by Kendon, Kendon does not warrant, and shall not supply service in connection with, the operation of the Product/peripheral combination, and Kendon will honor no warranty or service claim where the Product is used in such a combination and it is determined by Kendon that there is no fault with the Product. Kendon specifically disclaims any responsibility for any damage caused in any way by the use of product accessories and peripherals when such accessories and peripherals are not furnished by Kendon.
IX. GENERAL PROVISIONS IF THIS IS A WARRANTY:
A. This Warranty sets forth our responsibilities regarding the Product. Repair or replacement of the Product, as described herein, is your exclusive remedy. THIS WARRANTY IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES, IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
B. IN NO EVENT SHALL KENDON BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY LOSS OF USE, LOSS OF TIME, INCONVENIENCE, COMMERCIAL LOSS, LOST PROFITS OR SAVINGS OR OTHER INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR PUNITIVE DAMAGES OR ATTORNEYS’ FEES ARISING OUT OF THE USE OR INABILITY TO USE SUCH PRODUCT, TO THE FULL EXTENT SUCH MAY BE DISCLAIMED BY LAW.
C. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
X. GENERAL PROVISIONS IF THIS IS A SERVICE CONTRACT:
A. This Service Contract sets forth our responsibilities regarding the Product. Repair or replacement of the Product, as described herein, is your exclusive remedy. THIS DOCUMENT IS NOT A WARRANTY.
B. Obligations of Kendon under this Service Contract are backed by the full faith and credit of Kendon.