Kendon Ramp T-Bolts Replacement (Single/Double Ride Up Trailer)

Replacement T Bolts for Single & Dual Ride Up Trailers.  The T Bolts are used to secure the ramp/s to the trailers. This is a direct replacement.

• Sold as 1 Unit
• Single Ride Up Trailers - 4 Required
• Dual Ride Up Trailers - 2 Required

Kendon Ramp Wing Nut/Hardware Set Replacement (Single/Double/Combo/Ride Up Trailer)

Replacement Wing Nuts for Single, Dual and 3 Bike Trailers.  The Wing Nuts are used to secure the ramp to the trailer lift gate. This is a direct replacement.

• Sold as a Set
• Compatible with all Kendon Models using a wingnut to secure ramp.
  

Single Ride-Up SRL Retrofit Kit Product Description (Not a Trailer)

Kendon's New Single Ride-Up SRL Trailer Retrofit Kit offers a simple upgrade to the latest Single Ride-Up SRL technology. The Single Ride-Up SRL trailer expands on the standard single rail motorcycle trailer offering an easy loading solution for everything from lightweight sport bikes to heavyweight touring bikes. The Single Ride-Up SRL combines ride-up convenience with a lightweight, user-friendly design.

A 2003 or newer round tube standard Single trailer is required for this conversion kit to work (sold separately).

The Single Ride-Up SRL retrofit kit conversion incorporates Kendon's new SRL technology without having to change major axle parts or purchasing a whole new trailer. What exactly is SRL? SRL is short for "Suspension Reactive Loading." SRL eliminates the apex created by a traditional ramp angle and the bed of the trailer when loading and unloading. The independent torsion suspension on the ride up trailer works with the loading ramp to eliminate the apex and creates a smooth parallel surface for loading and unloading a bike. The suspension compresses and lowers the bed of the motorcycle trailer while loading a motorcycle and raises it back up to towing height after the bike is fully loaded onto the trailer.

IMPORTANT: Please ensure that you are ordering the correct part for your model trailer. If you have ANY doubts, please Contact Us for assistance with the purchase.

Single Ride-Up SRL Retrofit Kit Includes (Refer to Installation Instructions for details):

• (1) New Ride-Up Rear Section
• (3) Ramps Total - (2) Outside Ramps, (1) Center Ramp
• (1) New 6" Rubber Latch
• (2) Ramp Pins
• Additional hardware and instructions necessary for the conversion
• DOES NOT INCLUDE DIAMOND PLATE ( You must reuse your old diamond plate)

The Single Ride-up SRL retrofit conversion kit is available for 2003 and newer Kendon Single Rail Trailers for Motorcycles and Kendon Single Chopper Trailers (US Models only, excludes Canada and GO! Series models). The retrofit kit is NOT compatible with utility boxes installed on the trailer (ramps cannot be stored for transport if utility boxes are installed).

The conversion kit is a bolt-on component with minor drilling required for relocation of the rubber latch.

Single Ride-Up SRL Trailer Retrofit Kit Features & Benefits

Key Ride-Up Trailer Conversion Kit features and benefits.

• Easy Ride-Up Loading design
• Newly designed rear section offers a lower ramp angle for easier loading
• Lightweight lock down 3-piece loading ramp featuring integrated footboards
• Ramp sections are small enough to store in the trunk of a compact car or bolted into place on the trailer itself
• Expanded metal ramp surface improves traction and increases loading stability
• Made in USA

Dual Ride-Up SRL Trailer Retrofit Kit Product Description

Kendon's New Dual Ride-Up SRL Trailer Retrofit Kit provides a simple upgrade to the latest Dual Ride-Up SRL technology. Dual ride on motorcycle trailers are an easy loading solution for everything from lightweight street bikes to heavyweight touring motorcycles. These folding trailers for motorcycles combine ride-on convenience with lightweight user-friendly design.

A 2003 or newer round tube standard Dual trailer is required for this conversion kit to work (sold separately).

The conversion kit for Dual Rail Motorcycle Trailers incorporates Kendon's SRL technology without the need to change major axle parts or purchasing a whole new trailer. The Dual Ride-Up SRL Motorcycle Trailer incorporates our SRL technology that was first introduced on the Single Ride-Up SRL Folding Trailers. SRL, or "Suspension Reactive Loading," eliminates the apex created by a traditional ramp angle and the bed of the trailer when loading and unloading motorcycles. The patented independent torsion bar suspension on Kendon folding motorcycle trailers works with the trailer loading ramp to eliminate the apex and creates a smooth parallel surface with a much lower angle for loading and unloading. SRL ("Suspension Reactive Loading") technology uses the motorcycles weight to compresses and lower the bed of the trailer while loading and raises it back up to towing height after the bike is fully loaded onto the trailer.

Dual Ride-Up SRL Retrofit Kit Includes:

• (1) New Ride-Up Rear Section (Full newly designed rear section)
• (1) Trailer Loading Ramp - Folding ramp features fold-out foot boards
• (1) Detachable Rear Section Foot Extension
• (2) Over-the-axle foot steps and clamps
• (1) Ramp Storage Strap
• Additional hardware and instructions necessary for the conversion
  The Dual Ride-up SRL conversion kit is available for 2003 and newer Kendon Dual Rail Motorcycle Trailers (US Models only, excludes Canada models). The conversion kit is a bolt-on component.
• DOES NOT INCLUDE DIAMOND PLATE ( You must reuse your old diamond plate)